Industrial IoT Module Based On CM4
Suitable For IoT Applications Like IoT Getaway, Wireless Router, Intelligent Data Acquisition...
4G/5G/LoRa Support, Multi Interfaces
This is an industrial expansion module based on Raspberry Pi CM4, which features common interfaces such as Gigabit Ethernet, HDMI, USB, and GPIO, allows additional 4G / 5G / LoRa wireless communication modules to be connected via the M.2 or Mini-PCIe socket. There are also industrial interfaces/resources including RS485, CAN, and RTC.
Combined with the industrial rail-mount protection case, the module is an ideal choice for building IoT gateway, 4G/5G router, IoT data acquisition, or even the PLC device in industrial automatic control system, and more.
Part List Comparison
BASIC KIT | BASIC KIT + 4G MODULE | |
---|---|---|
CM4 wireless base board | √ | √ |
Black ABS case | √ | √ |
PCIe to 4G/LoRa adapter | √ | √ |
SIM7600G-H-PCIE 4G module | √ | |
PCB antenna | √ |
* please refer to Package Content for exact part list info.
Specifications
CM4 SOCKET | suitable for all variants of Compute Module 4 |
---|---|
NETWORKING | Gigabit Ethernet RJ45 |
M.2 B KEY / Mini-PCIe (via adapter), for connecting 5G / 4G / LoRa wireless module | |
Nano-SIM card slot, supports standard Nano-SIM card for 5G/4G/3G/2G communication | |
USB | USB 2.0 × 3 |
PIN HEADER | Non-isolated RS485 × 2, Non-isolated CAN × 1, Partial GPIO pins |
CAMERA | MIPI CSI-2 × 1 (15pin 1.0mm FPC connector) |
VIDEO | HDMI × 1, supports 4K 30fps output |
RTC | Real-time clock with battery socket and ability to wake Compute Module 4 |
STORAGE | MicroSD card socket for Compute Module 4 Lite (without eMMC) variants |
FAN HEADER | 5V/12V, allows speed adjustment and measurement |
POWER INPUT | 5V or 7~36V |
DIMENSIONS | 145 × 90 × 40mm |
Connecting With Compute Module 4
Standard CM4 Socket And Partial Raspberry Pi GPIO Header
Suitable For Compute Module 4 Lite/EMMC Series Module
4G/5G/LoRa Wireless Modules Support
Onboard M.2 Slot, Comes With Mini-PCIe Adapter As Well,
Compatible With 4G/5G/LoRa Wireless Modules With M.2 Or Mini-PCIe Interface
SIM7600G-H-PCIE 4G Module Optional
- 4G/3G/2G communication, GNSS positioning, global coverage
- Standard Mini-PCIe interface, high compatibility
- Multi-constellation high accuracy positioning GNSS receiver support
- Suitable for LTE, UMTS, and GSM network with global coverage
- Abundant software functions: OTA, LBS, TLS, VoLTE
- Up to 150Mbps (Max) downlink data rate and 50Mbps (Max) uplink data rate
- Supports popular OS driver: Windows, Linux, Android etc.
- AT commands of the SIM7600G-H-PCIE series are compatible with the SIM7500/SIM7600 series modules
- Please refer to SIM7600G-H-PCIE product page for details
- For quantity of 20pcs or more, other M.2 or Mini-PCIe modules are customizable (SIM7600CE-T / E-H / A-H, etc.), feel free to contact us
Rich Interfaces
Providing Interfaces Including: CSI / HDMI / USB / ETH / CAN / RS485 / M.2 B KEY
Reserved Space For Heat Dissipation
Rail-Mount Support
Rail-Mount ABS Protection Case, Easy To Install, More Safe Operation
Application Example
Suitable For IoT Gateway, 4G/5G Router, IoT Data Acquisition And Monitoring, Industrial PLC, Or Other Industrial Applications
What's On Board
-
CM4 socket
suitable for all variants of Compute Module 4 -
HDMI connector
supports 4K 30fps output -
USB 2.0 ports
3x USB 2.0, for connecting sorts of USB devices -
RJ45 Gigabit Ethernet
10/100/1000M compatible -
DC power supply
7 ~ 36V DC input -
CM4 status indicator
PWR: Raspberry Pi power indicator
ACT: Raspberry Pi operating status indicator -
4G/5G module status indicator
M.2 PWR: module enable indicator
M.2 NET: module operating status indicator -
PWR & USB
5V DC power supply or USB programming port -
M.2 B KEY
supports 4G/5G modules, or other communication modules using USB channel -
Nano-SIM card slot
supports standard Nano-SIM card for 5G/4G/3G/2G communication -
BOOT selection
ON: CM4 will be booted from USB-C interface
OFF: CM4 will be booted from eMMC or Micro SD card -
DC power supply
7 ~ 36V DC input -
Dual non-isolated RS485
2x RS485, with 600W lightningproof, anti-surge, and 15KV ESD protection (reserved 120R optional balancing resistor jumper) -
Non-isolated CAN
ESD protection and transient spike voltage protection (reserved 120R optional balancing resistor jumper) -
Micro SD card slot
for connecting a Micro SD card with pre-burnt image (Lite variant ONLY) -
FAN header
for connecting cooling fan, allows speed adjustment and measurement -
CAM
MIPI CSI camera port, 15Pin 1mm pitch -
RTC battery holder
supports CR1220 button cell -
M.2 VCC selection
select 3.3V or 4.2V power supply -
RTC interruption configuration
PI-RUN: CM4 will reboot on RTC interruption
GL-EN: CM4 powerdown on RTC interruption
D17: D17 pin is triggered on RTC interruption (default) -
IO-VREF selection
set the CM4 IO logic level as 3.3V (default) or 1.8V -
FAN power supply selection
select 12V (default) or 5V power to drive the fan -
System function configuration
BT_DIS: Bluetooth disabled, for CM4 with antenna variant ONLY
WiFi_DIS: WiFi disabled, for CM4 with antenna variant ONLY
WP_DIS: boot mode switch, ONLY be used when NOT booted from eMMC or SD card -
RTC/FAN I2C bus selection
SDA0/SCL0: I2C-10 is shared with CSI/DSI (default)
GPIO3/2: I2C-1 is shared with GPIO header -
Partial GPIO header
including 1x I2C, 2x GPIO pins, and power supply
Outline Dimensions
Resources
WIKI: CM4-IO-WIRELESS-BASE
Package Contents:
Weight: 0.348 kg
- CM4-IO-WIRELESS-BASE x1
- PCIe to 4G/LoRa adapter x1
- Screwdriver x1
- Screws pack x1
- 4G module (Optional)
SIM7600G-H-PCIE
PCB antenna IPEX connector
12V 2A power adapter