Industrial 8-Ch Analog Output Module
12-bit DA Conversion | DC 7~36V Wide Voltage Power Supply
Modbus RTU Protocol | Multiple Isolation Protection Circuits

Features
Modbus RTU Analog Output 8CH is an industrial standard analog output module, supports 8-ch simultaneous output. Adopts Modbus RTU protocol with built-in protection circuits such as power isolation, magnetical isolation, resettable fuse, and TVS.
- Configurable device address (1~255), multi devices can be cascaded on RS485 bus
- Onboard voltage regulator, supports 7~36V wide range power supply
- Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal
- Onboard unibody magnetical isolation, allows signal isolation, high reliability, strong anti-interference
- Onboard resettable fuse and TVS (Transient Voltage Suppressor), effectively suppresses surge voltage and transient spike voltage in the circuit, provides over-current/over-voltage proof, lightningproof & anti-electrostatic
- 12-bit DA conversion, using high-precision resistors for more accurate output data
- Onboard watchdog, for stable output without crashing
- Rail-mount case design, support stacking combination, easy to install and safer to use
- 3x LEDs for indicating the MCU status and signal transceiving status
Version Options
![]() Modbus RTU Analog Output 8CH |
![]() Modbus RTU Analog Output 8CH (B) |
Specifications
MODEL | Modbus RTU Analog Output 8CH | Modbus RTU Analog Output 8CH (B) |
---|---|---|
COMMUNICATION INTERFACE | RS485 | |
BAUD RATE | 4800, 9600, 19200, 38400, 57600, 115200, 128000, 256000 | |
DEFAULT COMMUNICATION FORMAT | 9600, N, 8, 1 | |
MODBUS PROTOCOL | Standard Modbus RTU protocol | |
POWER SUPPLY | DC 7~36V | |
OUTPUT | 8-ch current output | 8-ch voltage output |
RESOLUTION | 12-bit, 1μA | 12-bit, 1mV |
RANGE | 0~20mA | 0~10V |
OUTPUT ACCURACY | ±0.03mA | ±0.01V |
Primary Function
Supports Sending Modbus RTU Protocol Commands Via RS485
And Outputing Data To 0~10V Or 0~20mA Sensor

Industrial Grade Isolated Protection
Onboard power and signal dual isolation for RS485 communication, provides stable isolation voltage, features high reliability and strong anti-interference performance. Built-in TVS (transient voltage suppression tube) can effectively suppress the surge voltage and transient peak voltage in the circuit, lightningproof & ESD protection. Built-in resettable fuse and protection diode to ensure stable current and voltage output, provides over-current and over-voltage proof, improves shock-proof performance, suitable for industrial environments with high requirement.

Note: The internal component layout is slightly different between the two
versions, please refer to the actual product
Industrial High-Precision Analog Output
8-Ch Analog Output, 12-Bit DA Conversion, High-Precision

Interface Introduction

Connection Diagram
Supports Setting Device Address (1~255) For Multi-Device Cascading,
Supports Voltage Or Current Analog Output

Wide Voltage Power Supply, Isolated RS485 Interface
Built-In Fuse And Anti-Reverse Protection, With Power And Signal Dual Isolation

Rail-Mount Support
Supports 35mm Standard Guide Rail, With Rail-Mount Buckle, Easy To Install.

Supports Stacked Installation

Product Show

Dimensions

Resources
Wiki: www.waveshare.com/wiki/Modbus_RTU_Analog_Output_8CH
www.waveshare.com/wiki/Modbus_RTU_Analog_Output_8CH_(B)
Package Contains:
Weight: 0.147 kg
This product requires a power supply more than 15V (not included). It is recommended to purchase 19V power supply if you need it.
Modbus RTU Analog Output 8CH
- Modbus RTU Analog Output 8CH x1
- Power supply terminal adapter x1
- Screwdriver x1

Modbus RTU Analog Output 8CH (B)
- Modbus RTU Analog Output 8CH (B) x1
- Power supply terminal adapter x1
- Screwdriver x1
