Record low cost microSD FAT16 / 32 cards up to 64 GB
Simple command interface
Configurable baud rates
Boot defect is pro mini atmage328P 5 V 16 Mhz
Four SPI pogo pins
Two LEDs indicate writing status
2 mA inactive, 6 mA at maximum recording rate
OpenLog (blackbox) is a data logger that works through a simple serial connection and supports microSD cards up to 64 GB. The Open log (blackbox) can store or log large amounts of data in series and act as a black box of types to store all the data in series that your project generates.
The board has contained the openlog_blackbox_v2.0 firmware. The flight conroller transmits the information of your flight data in each iteration of control loop over a serial port to an Open log that must be recorded. After your flight, you can view the derived records using the interactive registration viewer:
Github.com/cleanflight/blackbox-log-viewer
You can also use the blackbox_decode tool to convert records into CSV files for analysis, or render your flight record as a video using the blackbox_render tool. These tools can be found in this repository:
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Shopping Cart
{"id":1664647233608,"title":"Openlog Serial Data Logger","handle":"openlog-serial-data-logger","description":"\u003cp\u003e \u003cstrong\u003e\u003cspan\u003eDetails:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eInput VCC: 3.3 V-12 V (recommended 3.3 V-5 V)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eRecord low cost microSD FAT16 \/ 32 cards up to 64 GB\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eSimple command interface\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eConfigurable baud rates\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eBoot defect is pro mini atmage328P 5 V 16 Mhz\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eFour SPI pogo pins\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eTwo LEDs indicate writing status\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003e2 mA inactive, 6 mA at maximum recording rate\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eOpenLog (blackbox) is a data logger that works through a simple serial connection and supports microSD cards up to 64 GB. The Open log (blackbox) can store or log large amounts of data in series and act as a black box of types to store all the data in series that your project generates.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe board has contained the openlog_blackbox_v2.0 firmware. The flight conroller transmits the information of your flight data in each iteration of control loop over a serial port to an Open log that must be recorded. After your flight, you can view the derived records using the interactive registration viewer:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cu\u003eGithub.com\/cleanflight\/blackbox-log-viewer\u003c\/u\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYou can also use the blackbox_decode tool to convert records into CSV files for analysis, or render your flight record as a video using the blackbox_render tool. These tools can be found in this repository:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cu\u003eGithub.com\/cleanflight\/blackbox-tools\u003c\/u\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/openlog-open-source-data-logger-pmdway-2_480x480_3bd0504f-0bd5-4097-8d15-bb4c664e311a_480x480.jpg?v=1593113833\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eResources\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/DATASHEET\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC3009\"\u003e\u003cspan\u003eDatasheet\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/LIBRARIES\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC3009\"\u003e\u003cspan\u003eLibrary\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/LIBRARIES\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC3009\"\u003e\u003cspan\u003eSample Code\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eTutorial\u003c\/span\u003e\u003c\/h5\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/KGk1L1p5QJA?start=242\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch4\u003e\u003cspan\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2022-12-06T11:21:56+05:30","created_at":"2019-03-12T14:14:55+05:30","vendor":"ThinkRobotics","type":"Breakout Boards","tags":["BRK-STRG","data","data logger","ELC3","logger","ZOHO UPDATED"],"price":79999,"price_min":79999,"price_max":79999,"available":false,"price_varies":false,"compare_at_price":85200,"compare_at_price_min":85200,"compare_at_price_max":90000,"compare_at_price_varies":true,"variants":[{"id":27846936657992,"title":"Without Soldered Pin","option1":"Without Soldered Pin","option2":null,"option3":null,"sku":"ELC3009","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Openlog Serial Data Logger - Without Soldered Pin","public_title":"Without Soldered Pin","options":["Without Soldered Pin"],"price":79999,"weight":20,"compare_at_price":85200,"inventory_management":"shopify","barcode":"ELC3009","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":16337143857224,"title":"With Soldered Pin","option1":"With Soldered Pin","option2":null,"option3":null,"sku":"ELC3009S","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Openlog Serial Data Logger - With Soldered Pin","public_title":"With Soldered Pin","options":["With Soldered Pin"],"price":79999,"weight":20,"compare_at_price":90000,"inventory_management":"shopify","barcode":"ELC3009S","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/thinkrobotics.com\/cdn\/shop\/products\/2_68768024-7aaa-4e9b-9bbf-9e8d7504f3d3.jpg?v=1577796060","\/\/thinkrobotics.com\/cdn\/shop\/products\/1_4cfbf713-cd30-43aa-85f3-d08aa61e04d1.jpg?v=1577796060","\/\/thinkrobotics.com\/cdn\/shop\/products\/Inked3_LI.jpg?v=1577796060"],"featured_image":"\/\/thinkrobotics.com\/cdn\/shop\/products\/2_68768024-7aaa-4e9b-9bbf-9e8d7504f3d3.jpg?v=1577796060","options":["Soldered"],"media":[{"alt":"Openlog Serial Data Logger","id":891860418632,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/2_68768024-7aaa-4e9b-9bbf-9e8d7504f3d3.jpg?v=1577796060"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/2_68768024-7aaa-4e9b-9bbf-9e8d7504f3d3.jpg?v=1577796060","width":800},{"alt":"Openlog Serial Data Logger","id":891860746312,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/1_4cfbf713-cd30-43aa-85f3-d08aa61e04d1.jpg?v=1577796060"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/1_4cfbf713-cd30-43aa-85f3-d08aa61e04d1.jpg?v=1577796060","width":800},{"alt":"Openlog Serial Data Logger","id":891860910152,"position":3,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/Inked3_LI.jpg?v=1577796060"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/thinkrobotics.com\/cdn\/shop\/products\/Inked3_LI.jpg?v=1577796060","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e \u003cstrong\u003e\u003cspan\u003eDetails:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eInput VCC: 3.3 V-12 V (recommended 3.3 V-5 V)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eRecord low cost microSD FAT16 \/ 32 cards up to 64 GB\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eSimple command interface\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eConfigurable baud rates\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eBoot defect is pro mini atmage328P 5 V 16 Mhz\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eFour SPI pogo pins\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eTwo LEDs indicate writing status\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003e2 mA inactive, 6 mA at maximum recording rate\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eOpenLog (blackbox) is a data logger that works through a simple serial connection and supports microSD cards up to 64 GB. The Open log (blackbox) can store or log large amounts of data in series and act as a black box of types to store all the data in series that your project generates.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe board has contained the openlog_blackbox_v2.0 firmware. The flight conroller transmits the information of your flight data in each iteration of control loop over a serial port to an Open log that must be recorded. After your flight, you can view the derived records using the interactive registration viewer:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cu\u003eGithub.com\/cleanflight\/blackbox-log-viewer\u003c\/u\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYou can also use the blackbox_decode tool to convert records into CSV files for analysis, or render your flight record as a video using the blackbox_render tool. These tools can be found in this repository:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cu\u003eGithub.com\/cleanflight\/blackbox-tools\u003c\/u\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0014\/4313\/5560\/files\/openlog-open-source-data-logger-pmdway-2_480x480_3bd0504f-0bd5-4097-8d15-bb4c664e311a_480x480.jpg?v=1593113833\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eResources\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/DATASHEET\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC3009\"\u003e\u003cspan\u003eDatasheet\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/LIBRARIES\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC3009\"\u003e\u003cspan\u003eLibrary\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/thinkrobotics\/LIBRARIES\/tree\/master\/ELECTRONIC_COMPONENTS\/ELC3009\"\u003e\u003cspan\u003eSample Code\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eTutorial\u003c\/span\u003e\u003c\/h5\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/KGk1L1p5QJA?start=242\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch4\u003e\u003cspan\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
I had used a lots of LoRa module till now, but it's really the best among all of them! the 1262 is a great upgrade in terms of output power and configuration. we can configure the output power, bandwidth, spreading factor and a tons of other things, which are not possible to configure on previous modules. the radiolib library works preety good with it and it also supports rssi and snr like features, which are very crucial when you are seriously researching on antenna or range related works! that's why I eventually like this module more then ebyte LoRas. To me this is the best module in IN8 68MHz, which is completly legal and free to use in India upto 1W! And also thanks to thinkrobotics, I got it in just 1 working day, and your packaging was also too good! Love your service, and keep this modules available on your websight. Your pricing of this module is too good, and I'll buy many of these modules. Thank you!
I had used a lots of LoRa module till now, but it's really the best among all of them! the 1262 is a great upgrade in terms of output power and configuration. we can configure the output power, bandwidth, spreading factor and a tons of other things, which are not possible to configure on previous modules. the radiolib library works preety good with it and it also supports rssi and snr like features, which are very crucial when you are seriously researching on antenna or range related works! that's why I eventually like this module more then ebyte LoRas. To me this is the best module in IN8 68MHz, which is completly legal and free to use in India upto 1W! And also thanks to thinkrobotics, I got it in just 1 working day, and your packaging was also too good! Love your service, and keep this modules available on your websight. Your pricing of this module is too good, and I'll buy many of these modules. Thank you!
Team is suppotive and solves all the queries .
The product is good and will surely help me in my project...looking forward for more trades with think robotics.
