Best seller

ThinkRobotics

Pixel Panel Flexible Individually Addressable WS2812 LED Panel

SKU: ELC2067-2

₹ 1,899.99

Out of stock

Select variant

32X8
Size
šŸ“¦ Min order 1
Chat with us on WhatsApp We reply quickly! Contact Us
Pixel Panel Flexible Individually Addressable WS2812 LED Panel32X8₹ 1,899.99
Ask AI about this product

TheseĀ WS2812B flexible LED matrix are a great way to add an impressive amount of color while still being able to individually control each LED. 64 orĀ 256 individually addressable LEDs on a flexible panel - you can create animations, games, or even incorporate them into a fun e-textiles project. On top of all that, thanks to its flexible backing, this LED Matrix can be bent and bowed to fit onto almost any curvy surface.

These panels require a 5V low voltage input for power which needs to be able to source a good amount of current – up to 5A in most uses (15A if all LEDs are set to bright white, which is NOT recommended). Attached to each flexible LED matrix are two 3-pin JST SM connectors and two sets of bare power cables (input / output), which provide you connections for DC5V+, COM-, DAT, and GND. Needless to say, if you are looking for a large panel of addressable LEDs to fit the contours of almost any surface you’ve come to the right place.

Note: Over bending may significantly reduce the structural integrity of the flexible panel. Do not bend this Panel too rough, you may damage LED traces or the panel itself. do NOT fold this matrix in half!

Specification:

  • Emitting color:pixel RGB ,IC WS2812
  • Voltage (V):DC 5V
  • Power:0.3W/pixel
  • Max Power:77W
  • Waterproof level: Non-waterproof
  • Working mode:external controller Arduino compatible.
  • Connection:VCC: RED; GND:BLACK; DAT:BLUE

Package included:Ā 1 X Pixel LED Panel Light WS2812b


How many LEDs are on the panel and are they individually addressable?
The panel is available with 64 or 256 LEDs and each LED can be controlled individually via the WS2812 protocol when connected to an external controller.
What power supply and current do I need for normal use?
It requires a 5V DC input and can draw up to about 5 A in most uses. At full brightness white the draw can reach around 15 A, which is not recommended.
What connectors are included and how should I wire the panel?
The module includes two 3 pin JST SM connectors and two sets of bare power cables for input and output. Connections provide DC5V+, COM-, DAT and GND; VCC is red, GND is black, and DAT is blue.
Can the panel be bent to fit curved surfaces and are there any cautions?
Yes, the flexible backing allows bending to fit curved surfaces. Do not fold the matrix in half and avoid over bending to prevent damage to LED traces.
Is this panel compatible with Arduino and external controllers?
Yes, it is designed for external controllers including Arduino. Use a suitable 5V power supply and connect the data line to your controller to drive the LEDs.
Welcome to the discussion thread for Pixel Panel Flexible Individually Addressable WS2812 LED Panel
Feel free to ask questions, share tips or report issues.

Fill out the form below and our team will get back to you with bulk pricing.

Description
Ask AI about this product

TheseĀ WS2812B flexible LED matrix are a great way to add an impressive amount of color while still being able to individually control each LED. 64 orĀ 256 individually addressable LEDs on a flexible panel - you can create animations, games, or even incorporate them into a fun e-textiles project. On top of all that, thanks to its flexible backing, this LED Matrix can be bent and bowed to fit onto almost any curvy surface.

These panels require a 5V low voltage input for power which needs to be able to source a good amount of current – up to 5A in most uses (15A if all LEDs are set to bright white, which is NOT recommended). Attached to each flexible LED matrix are two 3-pin JST SM connectors and two sets of bare power cables (input / output), which provide you connections for DC5V+, COM-, DAT, and GND. Needless to say, if you are looking for a large panel of addressable LEDs to fit the contours of almost any surface you’ve come to the right place.

Note: Over bending may significantly reduce the structural integrity of the flexible panel. Do not bend this Panel too rough, you may damage LED traces or the panel itself. do NOT fold this matrix in half!

Specification:

  • Emitting color:pixel RGB ,IC WS2812
  • Voltage (V):DC 5V
  • Power:0.3W/pixel
  • Max Power:77W
  • Waterproof level: Non-waterproof
  • Working mode:external controller Arduino compatible.
  • Connection:VCC: RED; GND:BLACK; DAT:BLUE

Package included:Ā 1 X Pixel LED Panel Light WS2812b


FAQ
How many LEDs are on the panel and are they individually addressable?
The panel is available with 64 or 256 LEDs and each LED can be controlled individually via the WS2812 protocol when connected to an external controller.
What power supply and current do I need for normal use?
It requires a 5V DC input and can draw up to about 5 A in most uses. At full brightness white the draw can reach around 15 A, which is not recommended.
What connectors are included and how should I wire the panel?
The module includes two 3 pin JST SM connectors and two sets of bare power cables for input and output. Connections provide DC5V+, COM-, DAT and GND; VCC is red, GND is black, and DAT is blue.
Can the panel be bent to fit curved surfaces and are there any cautions?
Yes, the flexible backing allows bending to fit curved surfaces. Do not fold the matrix in half and avoid over bending to prevent damage to LED traces.
Is this panel compatible with Arduino and external controllers?
Yes, it is designed for external controllers including Arduino. Use a suitable 5V power supply and connect the data line to your controller to drive the LEDs.
Reviews
Forum
Welcome to the discussion thread for Pixel Panel Flexible Individually Addressable WS2812 LED Panel
Feel free to ask questions, share tips or report issues.
Similar Products
Bulk Order

Fill out the form below and our team will get back to you with bulk pricing.

Custom Requirements?

Meet with our team